Designing a washing machine in Solidworks

Closed job
SKYMECH
SKYMECH
Employer
27 deals
Job category:
Design and 3d
Expected budget:

Negotiable

Preferable skills:
Published:
Finished

Job description

The design of the washing machine based on the visualization is to be done.

Input data for the project

● 3 pallets are to be washed one on top of the other

● drip tray under the whole machine

● manually hinged opening door

● all made of stainless steel

● 3 axes with washing nozzles

o 1. movable up-down nozzles in the corners (on one frame)

o 2. Horizontal axis - extending channel-shaped structure with nozzles for washing horizontal surface (maybe on sliding cable bearings). The pallet sheet is to be washed at the top and bottom.

o 3. Vertical axis - for washing the horizontal surface.

● OPTIONAL: Pallet rotation axis to use, for example, only one or two nozzles washing the pallet in the corners.

● Use linear plain bearings due to dirt.

● Drives on chain motors and with limiters.

● Gearmotor outside the housing preferably on top

● As required, nozzles on advancing cylinders (if using a single nozzle washing corners).

● Vertical nozzles on corners to operate on a single axis

● Service door at the rear of the machine - both washing systems on one or two sides - to be decided during the project.

● Hanging wires for nozzles (without guides).

● Operator panel - foresee and design the location

● Pump will be selected by the customer and will need to be placed

● Circulating water tank - this will be a drip tray at the same time.

● on the suction coarse filter

● from the tray everything goes to the tank

● drip tray grille

● There will be three pumps:

o The first pump will pump water from the drip tray directly to the nozzles

o The second pump will suck clean water from the tank with clean demineralized water

o The third pump will pump from the very bottom without the waste ford filter to the external tank

● Tray water surface height sensor - e.g. vibrating will be selected or mechanical float

● The tray can be made of plastic - to be decided during the project

● Ears screw holes for suspension for transport.

Type and number of projects:

1 project

Submitted offers 3

Add your offer or ask the client for more details