Robert Wood

O mnie

Hi, I have more than 10 years experience in PCB design and firmware field such as PIC, ARM, DSP, FPGA-HDL(Hardware Description Language).

I made a camera with CMV12000 and cyclone3 with clk 200MHZ. And I also made a TDI camera. I made a data acquisition board with cyclone2 and cypress with usb2.0 over 480Mbps. And I also made a laser distance Detector with PSD and cyclone, the accuracy is 5um in 5mm range.

And also I build robot soccer systems for small size and medium size robot cup. In small size systems, I used zigbee module for communication system and used STM32 as microcontroller. In medium size systems, I used radio module(nrf series) for communication system and used Raspberry pi board as controller.

When I made a camera with CMV12000, I used LVDS through clk-200MHZ to collect data from CMV12000 and sent data to computer with matrox solios data board through CameraLink Bus. I used DDR2 - clock 133MHZ to store temporary data of camera. In here data rate was over 1.6Gbps. When I made a